Vehicle specific fender flares - 4 pieces - 25mm wide - suitable for Jeep Wrangler JL (2018-)
The extensions are glued to the outer edge of the fender on the body. Inexpensive, flexible, and therefore almost indestructible rubber extensions. The fender extensions cannot be painted. Ideal, for example, for track widening using spacers or wider tires and rims. Includes TÜV Süd test report.
Vehicle specific fender flares - 4 pieces - 25mm wide - suitable for Jeep Wrangler JL (2018-)
Scope of delivery:
- 4 pieces (2x length 1010mm and 2x length 840mm)
- 1x special gel adhesive for additional fastening
- 25mm (the vehicle is widened by 25mm per fender / 50mm per axle)
- TÜV Süd test report (TÜV-Süd, Westendstr. 199, 80686 Munich, test report 16-00074-CP-BWG)
TÜV registration:
You will receive a TÜV Süd test report from us with the delivery of the extensions. The entry of the fender flares is not necessary, this is also in the report, but we know from experience and from many customer messages that the law enforcement officers like to see such a TÜV confirmation again. Only then will there really be no trouble with the inspection service and that's why we had a TÜV Süd report drawn up.
Suitable for the following vehicle:
Manufacturer: FCA (USA)
Designation: Wrangler
Type: JL (officially still JK)
Year of manufacture: 2018-
ETG no.: e4*2001/116*0116*as of supplement 26 ...
Assembly:
- the ambient temperature and the temperature of the components or mounting surface must be a minimum of 20 ° Celsius during assembly and at least 24 hours afterwards
- the surfaces on the vehicle for assembly must be rust-free, smooth, thoroughly cleaned and free of grease
- After removing the carrier film, the widening must be pressed against the surface for approx. 1 minute with high and even pressure
- the ends of the fender flares can be adapted to the vehicle look with a sharp carpet knife
- we recommend that you leave the vehicle for at least 6 hours after installation
- the final strength of the glued areas is only reached after 48 hours
- please do not wash the vehicle for at least 48 hours
- For some widths, some mounting situations, structured surfaces or if the installation instructions cannot be followed, additional fastening with e.g. Self-tapping screws or body adhesive required
For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.
Hansen Styling Parts GmbH
Dorfstr. 9
DE-24247 Mielkendorf
WEEE-Reg.-Nr.: DE74790394
Tel.Nr.: +49 4347 706970
E-Mail: [email protected]
Internet: www.hansen-styling-parts.de
Matching items
